Actual4Exams DES-DD33 Real Exam Question Answers Updated [Feb 09, 2022]
Easily To Pass New EMC DES-DD33 Dumps with 55 Questions
NEW QUESTION 24
An administrator wants to integrate a PowerProtect DD appliance into their current backup environment using CIFS, NFS, DD Boost, and VTL.
Which backup applications support these protocols?
- A. IBM Spectrum Protect and Veritas NetBackup
- B. Veritas NetBackup and Dell EMC NetWorker
- C. Dell EMC Avamar and Dell EMC NetWorker
- D. Commvault Simpana and Veritas Backup Exec
Answer: B
NEW QUESTION 25
What is the correct sequence of steps to configure storage for Dell EMC Cloud Tier in the DD System Manager?
Answer:
Explanation:
NEW QUESTION 26
What information does the daily Autosupport report contain?
- A. MTree capacity and System alerts
- B. Quota alerts and MTree capacity
- C. System and Quota alerts
- D. System and MTree capacity
Answer: C
Explanation:
The autosupport command manages system reports. Command options enable administrative users to manage two reports that describe the state of a Data Domain system: the autosupport report and the daily alert summary.
NEW QUESTION 27
An administrator monitors the performance statistics of a PowerProtect DD appliance. Low disk-write rates are shown, and the network inbound traffic is high.
What is the most likely cause of this behavior?
- A. Known segments
- B. Disk failure
- C. Expired segments
- D. NVRAM failure
Answer: A
NEW QUESTION 28
Which are supported compression algorithms in DDOS?
- A. lz, gz, and gzfast
- B. dsp, gz, and lz
- C. bmp, lz, and gz
- D. rle, lzw, and lz
Answer: A
Explanation:
Prior generation appliances compressed data using the default lz algorithm. Other types of compression algorithms such as gzfast and gz were also available.
NEW QUESTION 29
What is a characteristic of using replication with Dell EMC Cloud Tier?
- A. Always takes place between the source and destination cloud tier
- B. Cloud Tier is required to be configured on the source and destination systems
- C. Does not require that a file be recalled from the cloud on the source
- D. Always takes place between the source and destination active tier
Answer: D
NEW QUESTION 30
When should using Virtual Synthetic backups be considered?
- A. Daily incremental backups are larger than 15% of a normal full backup
- B. PowerProtect DD appliance has more than 10 disks
- C. Backups are nonfile system data such as databases
- D. Backups are large and localized
Answer: A
NEW QUESTION 31
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit.
What is the required amount of metadata storage (TB)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 32
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?
- A. SSL
- B. HTTP
- C. FTP
- D. SSH
Answer: B
NEW QUESTION 33
A PowerProtect DD backup administrator wants to delegate some Operations to their Monitoring and Control team. The administrator wants to add a user to the Monitoring and Control team with limited access to only check the health of the PowerProtect DD appliance.
Which role must be applied to the new user?
- A. Limited Admin
- B. User
- C. Backup Operator
- D. Tenant Admin
Answer: B
Explanation:
The User role provides read-only access to monitor activities and operations.
NEW QUESTION 34
Which NDMP device is supported on a PowerProtect DD appliance?
- A. CIFS
- B. DD Boost
- C. NFS
- D. VTL
Answer: D
Explanation:
A system can present itself as a file server, offering NFS, CIFS access over Ethernet; as a virtual tape library (VTL) over Fibre Channel; as an NDMP tape server over Ethernet; or as a disk target using application specific interfaces like DD Boost. DD VTL is qualified with leading open systems and IBMi enterprise backup applications.
NEW QUESTION 35
What are some possible network bottlenecks for a PowerProtect DD?
- A. Connectivity, firewalls, and routing protocols
- B. Routing protocols, switches and routers, and wire speeds
- C. Configuration, wire speeds, switches and routers
- D. Connectivity, routing protocols, and configuration
Answer: C
NEW QUESTION 36
When using the DD VTL Tape Out to Cloud feature, which status will a tape show once it is in the cloud tier vault?
- A. Offsite
- B. Archived
- C. Vaulted
- D. Offline
Answer: B
NEW QUESTION 37
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?
- A. L180
- B. L6000
- C. L2000
- D. TS3500
Answer: D
NEW QUESTION 38
What system role is required to create the second security officer for a PowerProtect DD?
- A. security officer
- B. admin
- C. sysadmin
- D. limited-admin
Answer: A
Explanation:
A security role user, who may be referred to as a security officer, can manage other security officers, authorize procedures that require security officer approval, and perform all tasks supported for user-role users.
NEW QUESTION 39
How can remote logging with a syslog server be configured on a PowerProtect DD system?
- A. Use the DDMC to enable the remote logging
- B. Use the DDSM to enable the remote logging
- C. Remote logging is enabled by default
- D. Use the CLI command log host enable
Answer: D
NEW QUESTION 40
Backup administrators have noticed slow backups on the AIX environment.
To fix the issue, what should the set large_send be for each NIC, and what should the NFS option be set to?
- A. yes and nfs_rfc1323=1
- B. yes and nfs_rfc1323=0
- C. no and nfs_rfc1323=1
- D. no and nfs_rfc1323=0
Answer: A
NEW QUESTION 41
A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.
The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.
What is the weekly burn rate (GB) after six daily incremental backups and one weekly backup?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 42
What happens to the data when it is moved from the active tier to cloud tier?
- A. It is deduplicated and stored in a file system in the native format
- B. It is compressed and stored as object storage in a new format
- C. It is deduplicated and stored in object storage in the native format
- D. It is compressed and stored in block storage in a new format
Answer: A
Explanation:
Every file has a meta-data. Meta-data of the files which is getting moved is stored on active tier and data and metadata is moved into the cloud. There is no multiple data-movement policy set on single mtree. Data moved to particular cloud unit depends on datamovement policy. And only the unique data is sent to the cloud. This is done using the deduplication.
NEW QUESTION 43
Following best practices for a PowerProtect DD CIFS environment, what is the recommended SESSTIMEOUT value in seconds?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
SESSTIMEOUT value from the default 45 seconds to 3600 seconds.
NEW QUESTION 44
A PowerProtect DD system is configured for VTL. The backup application requires a minimum tape capacity of 800 GiB.
What is the minimum tape type to support this requirement?
- A. LTO-2
- B. LTO-5
- C. LTO-4
- D. LTO-3
Answer: C
NEW QUESTION 45
Which command is used to check if NFS is enabled?
- A. nfs status
- B. system show
- C. nfs show clients
- D. nfs enable
Answer: A
NEW QUESTION 46
......
Latest DES-DD33 Study Guides 2022 - With Test Engine PDF: https://torrentpdf.actual4exams.com/DES-DD33-real-braindumps.html